• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

How to Replace a UPVC Window Handle

Don't panic if your upvc handle is broken. Replacing the upvc handle on the window is a simple task that can be done in a couple of simple steps.

No matter if you are using a cranked or an in-line espagnolette style window handle, they all have a square spindle bar that extends from the back plate and is inserted into the locking mechanism.

Find out the type and the size of the lock and handle

Over time window handles and locks can become damaged or lose their function. The good thing is that this can usually be remedied without replacing the entire window unit made of uPVC. One of the first things to do is identify the type of handle and lock you have to determine the parts will be required for replacement.

Identifying the kind of handle can be done by looking at the handle's base. A screw or pin will secure the handle to its base. If the screw is gone, it could be a sign the handle is separated from the base. If the handle has split internally and no longer grips onto the spindle, it could also indicate that it needs replacing.

There are a variety of different kinds of uPVC window handles The most well-known is the Espag handle. They are usually fixed with two bolts and the spindle works with the locking mechanism within the frame of the window. These handles are usually used on tilt and turn uPVC windows.

Another type of uPVC window handle is the Cockspur handle. Similar to the Espag handle, however they have a low projection from the frame. These handles are usually used on older uPVC window frames.

Venetian window handles are a different option. They are similar to Espag handles, but they have a flat bottom that allows them be installed flush with the frame. These handles are a great choice for homeowners looking for a stylish handle that will blend with their uPVC frames. The handles are also available in a broad variety of colors to match any decor.

Find the spindle's measurement.

Before ordering a new handle, it's crucial to understand how the original is attached. This will tell you how it is tight or loose and whether it will fit correctly into the window frame. This can be done by identifying the handle's type and measuring the spindle. The spindle is the steel shaft that connects the handle to the lock in the window frame. It's available in a variety of sizes and the current industry standard being 8mm. Older handles may have a cross-section of 9mm, so you'll need to measure your old handle to ensure you get the correct size replacement window pane.

There are various kinds of window handles. The most commonly used are the inline Espagnolette handles and the cockspur handles. They operate a locking mechanism in the window using shootbolt rods that lock the window when it is closed. Depending on the type of handle, they are held in place by screws or pins.

You can buy Upvc handles replacement on the internet or in many DIY stores. They come in a range of finishes and are suitable for new or replacement windows. For added security they can be key-locking or non-locking in fire-escape.

To take off the handle just open the window towards the door and remove all screws that hold it in place. Be careful not to damage the screws, and put them in a container to be stored for future use. After the screws have been removed, carefully remove the handle and measure from the base to the tip of the spindle. This will provide you with the necessary information to purchase the right replacement. The handle's spindle is the shaft made of metal that connects it to the lock gearbox within the window frame.

Remove the old handle

The replacement of a uPVC handle is a simple task that takes just five minutes if you've got the right tools. The first step is to identify the lock type and handle, which will help you find the correct replacement. After that, measuring the spindle will make sure that the new handle is a suitable to the existing one. The handle that was used previously needs to be removed and replaced with the new.

The majority of uPVC handles come with inline Espagnolette handles. They have central spindles that slot into the locking mechanism on the window. They are usually simple to remove, but they might require force if become stuck. There are typically two screws that keep the handle in place which can be removed using the help of pliers or a screwdriver. You may also need to remove pins based on the type of handle.

Once the screws are removed Once the screws are removed, you can remove the handle. If the handle is unlocked and the top of the baseplate will be visible. It will reveal two additional screws that can be removed. There's also a small silver or other colour sticker that needs to be removed if in place.

It is now possible to screw in the new handle using the screws that came with the old handle. Align the screw holes on the window with the holes in the handle. Once you've completed this, replace the cap screws. Test the new handle. Changes to a window made of uPVC can be a quick and simple job, but it's important to make sure you complete it in a proper manner.

Replace the handle with the new one.

It's time for you to install your new handle if you have successfully removed the old handle from the frame. Start by locating and removing the screws with your screwdriver. Once they are removed, put them in a secure place and proceed to the next step.

Then screw the spindle in by aligning it with the existing hole. Be sure to align the holes of the handle with those in the window frame and use a screw similar in length to those used previously or it could result in the handle not being secure.

The uPVC Espag handle is fitted with a spindle of 7mm square that turns the lock mechanism of the window. This type of handle is utilized in most modern uPVC Windows. uPVC Cockspur handles (also known as Cotswold handles) feature an extended nose that locks over the frame's outer or transom bar cross member. They are typically found in older uPVC windows.

It is essential to lock and unlock the window a few times after the handle has been installed. If all goes according to plan, the replacement uPVC handle should be securely fixed and operating smoothly. If you are experiencing any issues, these steps will help you determine the cause and fix it quickly. If you are struggling with your uPVC handle or are experiencing other problems with your glazed home improvement don't hesitate to call us at Bridgewater glass window replacement for professional assistance. Our glaziers are trained to repair or replace a variety of window frames and handles, making us an excellent option for your double glazing window replacement glazing needs.

Test the new handle

As time passes and through regular use over time, uPVC locks and handles may be damaged and wear and tear. This can leave them less secure and efficient which is why it's crucial to replace them as quickly as possible. This is also a good idea to do when you are upgrading your windows. Switching your handle and locking mechanism will help to maintain your new windows' integrity.

When it comes to uPVC window handles, there are a number of different styles. Some are fixed with pins or screws, while others have blades that slide into the lock mechanism. Each type has its own method of replacement, therefore it is important to know which type you've got before you begin working on it.

The most well-known kind of window handle is the espag. They are typically found on newer uPVC Windows. The spindle extends from the handle to the lock gearbox, and it activates the locking mechanism when you open the window. They are also simple to take off. However, you must be careful not to harm either the mechanism or the handle.

Cockspur window handles are a popular choice for uPVC windows. They're fixed by a spur that hooks onto the striker plate in the shape of a wedge on the frame, and when you shut or tilt the window, it engages the locking mechanism. This kind of handle can be more difficult to repair than other types, but it's an excellent choice for homes with a lot of windows replacement.

Venetian window handles are secured by two bolts and have a slim projection from the frame, unlike the Espag handle. They're great if you want an elegant flush handle that blends with your uPVC windows. These are a great option for commercial and residential buildings.