• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC windows are an excellent choice for modern homes. They are long-lasting, durable and easy to maintain. They do not get rotten or rusty like aluminum and timber.

It is essential to clean and oil UPVC doors and windows on a regular basis. This will save you from unnecessary repair costs and also improve the efficiency of energy.

1. Broken Glass

The broken glass in your windows could cause significant damage to your home and even be fatal. It is essential to ensure that your windows are in good working order.

For single pane windows it is fairly easy to replace them, and the new window will usually fit inside the frame of the previous one easily. If you have double-paned windows which are held together by internal beading, it will be difficult to remove and replace the old panes. In this instance, you will need to locate some plastic spacers that will assist the new pane to fit perfectly into the window frame.

If you are going to try to remove the window panes yourself, it is essential to wear appropriate safety gear such as gloves that are thick and eye protection. It is also recommended to lay down a drop cloth before you begin working on the window panes to ensure that any shards fall onto the fabric, not onto the floor and could be trampled.

It's a good idea to tape the gap once the glass has been removed. This will keep drafts and water from entering your home until a professional comes out to fix the window. This will also provide an obstruction to prevent intruders from making their way into your home. If the distance between the door and the window is large, you might need to consider security screens that has a window. This will give you the best of both.

2. Sagging

Upvc is a long-lasting and energy efficient alternative to timber sash window. Over time, they can be affected by a variety of issues such as sliding. A sagging upvc window repairs near me windows can cause problems with light, draughts, and even security. If you find that your uPVC window is beginning to shrink, it's crucial to act fast to prevent the problem from worsening.

To fix a sagging window you can try to reposition the hinges. First, you'll need to unblock the windows so you can access the frame. Then, using a screwdriver, you can unscrew the hinges on the top and bottom and adjust them by turning them clockwise or counter-clockwise. Close your window to test the fit after having moved your hinges. If you're satisfied with the fit of your window, tighten the screws to secure them in place.

If you are unable to reposition the hinges, you might have to replace the seal. Over time rubber seals can lose their elasticity and become dry, which causes them to lose tightness. If this happens, it's essential to replace the seal as soon as you can to ensure that your upvc window repair windows are waterproof and safe from drafts.

UPVC handles can also become loose. Often it is due to screws that have become loose over time. However, it can occur because the handle mechanism has been worn out. Fortunately, it's easy to fix the loose uPVC window handle yourself. First, you'll need to close the window and then perform an initial fitting. The corners of the sash should be aligned with the casing joint. If it doesn't then you can make use of a screwdriver to loosen the handle and reverse the mechanism back into its original position.

3. Water Leaks

If you awake to wet floors and mouldy walls each time it rains it's crucial to take action. Leaks of water from windows can cause structural damage to your home and hinder your ability to control the temperature of your home. Most often, uPVC window leaks are caused by a damaged or missing sealant.

It is a fairly easy fix that can be done by any skilled DIYer. Based on the severity of the problem the caulking used previously may require removal before a fresh layer can be put on. It is crucial to remember that when it comes to uPVC window repairs, you should avoid the temptation to "over-caulk and then make the area more difficult to clean and decrease the efficiency of your energy usage.

Verify that the drainage holes do not have debris inside them and that the sill pan has been properly angled to drain away from the window. In more extreme situations, you may have to replace the window.

Other signs of long-term water leakage include sills that are rotten and the appearance of black spots of mold on the walls near the window. The fungus thrives in damp conditions and can spread quickly throughout the home.

If the leakage occurs between the double-glazed window, it is more likely that the issue is more related to the seal, not the frame. This can be easily repaired by a uPVC window expert who can replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or loose and blow open with a breeze it could be hinges at fault. Anyone who is a skilled DIYer can fix these in a matter of minutes.

Like any mechanical part hinges are prone to be damaged over time. It's very simple to change a window hinge but it's much easier if someone helps you hold the frame.

Check that the upvc window repairs hinges open and close in the correct direction. Look for the arrows on each hinge to determine which direction the window should be opened.

The issue can be caused either by opening the window incorrectly or a faulty installation at the factory. Sending us photos through our website can often resolve the problem. We are more than happy to give assistance.

It is also crucial to lubricate the hinges regularly. This can be done by applying an oil that is light in nature to the hinges. We recommend using a solvent-free lubricant, such as 3-in-one Multi-Purpose Oil. Regular lubrication will make the window easier to open and close. It can also reduce the risk of a window sticking and prevent corrosion. This is recommended to be done at least every year. WD40 and other solvent-based fluids are not recommended since they will damage parts of your uPVC window.

5. Draughts

Draughts in upvc windows can be caused by a variety of different things. The hinges may also become unbalanced due to wear, which can cause a gap between the frame and sash. They can be repaired by giving them good clean, but in the event that they are beyond repair it may be necessary to have them realigned or replaced. The second is the interlock, which is on the hinge side of the window repair, can be misaligned. Again, it is possible to just give them a thorough clean, however in some instances it could be necessary to get them replaced.

The second most frequent cause of draughts is the window seals, these are susceptible to being worn out or damaged over time, and let air escape through the gaps. This can be prevented by replacing them with high-quality weatherstripping. Replace the upvc window repair near me windows with low-emissivity glass. This will help to regulate indoor temperatures and lessen the risk of draughts.

Lastly, one of the most effective ways to cut down on the draughts in your home is to use a draught excluder, these are typically fabric tubes filled with some sort of filler and can be positioned on top of your windowsill. These will help to stop cold air from entering and keep your home warm and cozy!

Your upvc windows can remain a great source of insulation and security for your home with a little regular maintenance and repairs. It is crucial to realize that all windows have a lifespan and there may come the point when it's more efficient to replace them than repair them. If you are experiencing issues with your upvc window it is recommended to speak with an expert as soon as you can.