• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

UPVC Replacement Door Handles

The handles on your doors wear out over time and will need to be replaced. It is important to match the dimensions of the old handles when replacing them.

The top screw's position, the lever and the keyhole size are the three measurements you need to check. Refer to the size guide for assistance with this.

Inline Lever/Lever

A lever handle is a modern-day door handle designed to work with new or replacement doors. This kind of handle is available in various designs and finishes. This handle is offered by several manufacturers, including Avocet ERA Fullex Hoppe Mila Millenco Yale.

Fab and Fix Windsor Inline Sprung Lever Door Handle

The uPVC/composite door handles Victorian door handle handles are made of sturdy materials and are ideal for multi point lock doors which require a robust design. The handles are inline and use the same screws and spindle to secure them. They can be easily mounted on any uPVC/Composite door.

The sprung lever design allows the handle to be placed and angled to provide a comfortable grip and is suitable for all users. The handle has been endurance-tested to 200,000 cycles. This helps to ensure that the quality of finish and performance is maintained over time. The lever that is sprung can be cut to fit the widest range of locks. This is particularly useful for doors with narrower openings where the cylinder is situated further back from the door. A shortened lever is also an excellent option for doors where the latch can be opened by a thumb turn inside.

Lever Pad

A Lever Pad door handle made of upvc functions differently from lever-type handles on doors. These handles are operated by a single spindle or by two spindles, either inline or offset. They are typically utilized on UPVC doors with double glazing handles double glazing handles and come in a variety of finishes & variations.

The handles have been tested to the minimum of 200k cycles and are available in a variety of finishes, including White and Silver, as well as Chrome & Gold. The finish is in line with BS EN 1670:2007 Grade 5 and is also resistant to corrosion, giving the handle a high degree of durability and performance for the intended use.

All of the UPVC lever pad designs come with the spindle and screws that allow them to be put on an existing or new uPVC door. The backplate fixing centers of 211mm allow for a larger size of handle which can be beneficial in replacing a defective or worn multi-point door lock mechanism. The levers for these handles for doors have springs, which eliminate the issue of door handles that move out of their horizontal position when not in use.

When selecting a replacement UPVC handle and spindle, it is important to match the dimensions of the PZ of both the multipoint lock and the uPVC door. This measurement can also be called 'handle centre' or cylinder centres'. It is important for matching the correct handles.

After you have determined the proper PZ size and the correct PZ size, you must make sure that the lever and push pads are shaped to match the American with Disabilities Act compliant handles that you need for your door. They are usually of a round or square design with an internal lever as well as an external push pad.

The majority of UPVC Lever Pads that we offer are sprung. This means that they return to a horizontal position after not in use, rather than hanging and possibly securing to the frame. This prevents draughts from entering the property. The majority of UPVC lever pad handles come in both left and right handed models which allows them to be placed on either side of the doors.

Euro Cylinder

Cylinder locks can be found on uPVC and other kinds of doors. They work with a key to unlock a cylinder case which then reveals pins which can be aligned with the pins inside the lock body, permitting them to turn the cam, thereby opening the door. Euro Cylinders can be fitted with up to six pins, with both internal and external doors generally needing different levels of security.

Selecting the right cylinder for your needs is vitally important; this depends on how your door and handle are used. External doors, for instance, should be fitted with cylinders that are more secure and doors inside can be secured with an ordinary cylinder. Certain cylinders come with extra features that can increase security, like anti drill or anti bump properties.

To ensure that the euro cylinder is the correct size for your door, it should be measured correctly. The cylinder should be measured from the hole in the center of the fixing screw to the other end of the cylinder, including the thumb turn if you have one. It is best to do this while the lock is in place however when this isn't possible, you can take it off to measure. It is crucial to ensure that there is no cylinder that extends beyond the handle or escutcheon. This could make it susceptible to lock snapping attacks.

Most modern cylinders are made with bump and anti-drill features built into their design. These features are designed to minimize the chance of a attack by forcing the cylinder to rotate in an opposite direction. This can help stop the attack and keep your doors safe.

There are cylinders that are constructed to resist snapping. This is a typical attack on cylinders. A specific tool is used to break the lock's break line and the front of the cylinder is snapped off. This is a quicker and simpler method to gain access than through the use of a multipoint locking system. It also leaves no evidence of the break-in which can hinder insurance claims.

Spring Cassette

The spring cassette is situated in the base plate of the door handle. It is a spring-loaded solution to return your multipoint lock handles back to their normal position after use. Previously a lot of these types of handle didn't have a spring built into them, and without it they are more likely to slide or 'drop' once the locking mechanism has been disengaged. This simple part is the most effective way to fix this problem. It also helps prevent your upvc door from becoming stuck in either the closed or open position as they aren't easy to close manually.

These spring cassettes were created to be used with sprung multipoint locks. They won't work with unsprung handles, and you will have to cut a hole in your backplate for them to fit. (Please check the image for a detailed diagram). They are a replacement for broken or missing cassettes in the backplates of door handles of many brands of upvc chrome door handles doors. They are sold as one unit. They feature a square cut out that can accommodate an 8mm shaft.

These spring cassettes offer a great value solution to the problem of door handles that have become sagging. They are simple to install and can extend the life of your uPVC door. Contact us for more information on our wide range of uPVC accessories and spares. We are here to assist and provide professional advice.