• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

upvc door handle Handle Replacement

Door handles may seem like a small detail but if you aren't happy with the style or design of them, or find them difficult to use, it's worth replacing them. Installing a new door handle is simple if you have patience.

Most modern door handles have cover plates that hide the screws to create a stylish appearance. However, you'll have to attach them separately if your new handle does not already have them.

Take off the handle from the old one.

Door handles are not only an important aesthetic addition to your home, but they're crucial for safety as they allow you to lock and unlock your door. As time passes the door handle could start to lose its grip or feel a bit loose. It could also appear old and worn. This is an indication that it's time for a replacement.

One of the first indications that your door handle needs replacing is the fact that it is becoming difficult to operate. This is a serious problem as you will no longer be in a position to lock or unlock the door, which could put you and your family at risk.

It's also a good idea to replace the handle on your door when it's damaged or broken. A damaged or broken door handle repair near me handle can be dangerous, especially for elderly and children members who might struggle to open it. They may get trapped. It's easy to replace a damaged handle on a door.

Most modern door handles are standard size and so they are suitable for any door. If you're not sure if your new door handle will work, take off the old one and measure the holes in its housing. This will let you purchase the correct size door handle.

It is easiest to remove the old door handle by unscrewing it from the door. Usually, a screwdriver is used. Some door handles have an enclosure plate that hides the screws that mount them. You will need to remove this to get to the screws. After you have removed the old handle, take note of the way in which the spindle is connected. This will assist you in aligning the new handle.

Alternately, you can take off the door handle by removing it from the latch mechanism. You can use a screwdriver to remove the door handle. But, you'll need to locate the small latch that is located on the edge trim piece. Once you've removed the latch, take the handle off the strike plate and then remove the latch off the door's edge.

Removing the Strike Plate

When replacing your handle, you'll be required to replace the latch plate, which is the hole that the door's latch is inserted into when it closes. The new handles will come with two latch plates: a rectangular and circular plate (see the image above which illustrates the components of a door handle). If you have an old rectangular latch plate, swap it with a round one. This will allow the latch to be able to hook onto the strike plate and make the handle easier.

The first step is to take off the screw that holds the old latch plate. The screws can be very tight and will require some force to loosen. If you can, it might be beneficial to have another person help with this process.

The latch plate should easily lift itself out of the door after the screws have been removed. If it's stuck or won't move using a nail file to scrape around the edges of the latch plate. This may help free the plate.

Now you can prepare the new strike plate to be installed. With the wood screws that came with your new handles, screw the latch plate onto the inside of the doorjamb. Be careful not to tighten too much the screws, as this may cause damage to the strike plate.