• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

how to reprogram a subaru key fob to Programming a Subaru Key Fob at Home

The key fob to be programmed by an auto locksmith or spare subaru key dealer, based on the age of your Subaru is. This is typically done by connecting a computer to the computer in the vehicle.

To program your Subaru, start by unlocking the driver's door with the door button control and then close it. You will hear a chime in the instrument panel and the dome lights will blink.

Step 1: Locate your transmitter circuit board

There are several ways to program your keyfob. First, you need to determine the kind of key fob you own. This can be done by taking a look at the shape of the key fob, or by listening to your car's chime.

Once you have the data you need, you can begin the process of programming your keyfob from home. You'll require a flathead and a metal key to accomplish this. Open the key fob by twisting it. Push the key's metal part into the case and then release the battery by pushing the tabs that hold it in place. Replace the battery and then put the case back together.

Step 2 Step 2: Unscrew the Key Fob Case

It is an ideal idea to change the battery of key fobs if they're not functioning. However, there are situations in which the buttons inside the key fob could be damaged. If you see that the contacts made of metal on the button are loosened, try soldering them in their place in order to get them back to work again.

Before you start the process, ensure that the doors of your car are shut and the ignition is off. You can do this by closing the driver's side door and pressing your door button ten times in rapid succession. Then, you'll hear the instrument panel chime, and your dome lights will blink. This indicates you're now ready to proceed.

Step 3. Insert the key fob into the ignition

A lot of articles on the internet will teach you how to program your new subaru key or replacement Subaru keyfob at home. However, the majority of them don't offer precise instructions. Reprogramming an electronic lock is best handled by a professional auto dealer in Fort Bliss or a locksmith.

Sit in the driver's seat of your Subaru with the engine off and the doors closed. Use the door button to unlock all the doors. Close and open the driver's door 2 times. Then, insert and remove the key from the ignition switch (don't turn it) 10 times in 40 seconds. The system will chirp to confirm that the settings have been changed.

Step 4 Step 4: Switch on the ignition

Before proceeding with this method of programming a key fob, it is important to remember that this process only works if you own one working key already. If not then a dealer or auto-locksmith will have to program the key for your subaru key fob programming Fort Bliss.

Once your key is programmed and you are able to start your car in less than five minutes. Start by closing all doors and shutting off the engine. Sit in the driver's seat and unlock all the doors by pressing the button on the door. Place the key into the ignition then turn it on to the off position (the electrical systems will come on, but the engine is off), and then back to the off position 10 times in rapid succession.

Step 5: Unlock the Driver's Door

Subaru offers a wide range of luxury automobiles equipped with key fobs that lock and unlock doors, turn on the engine, and defrost windows. However, at times, these devices do not function properly.

Contact a locksmith or a dealer to fix the issue. This will resolve the issue and ensure that your vehicle is secure.

You must first open and close the driver's side door. Then, put the ignition key in and move it to the first position. Then, reverse it to the off position. Repeat this 10 times in one row as fast as you can. After tenth attempt you will hear a chime.

Step 6 Step 6: Press the Lock/Unlock key on the driver's Door

If you're looking to replace the battery in a Subaru key fob, the procedure is easy. First, open the external fob casing. Use a flathead for prying the interior case open and then remove the old batteries.

After removing the battery, replace it with a new one and close the case. Then, sit in the driver's seat, and unlock all the doors using the door button control. Finally, insert the key in the ignition and turn it to ensure that the electrical systems are powered on but the engine is off. Repeat this 10 times in a line until you hear a sound on the instrument panel. This will enter the system into programming mode.

Step 7 Step 7: Press the Lock/Unlock button on the Passenger's Door

For certain owners, the irritating sound that is heard when locking and unlocking the Subaru key fob from outside the vehicle can be distracting. In certain instances, you can disable the chirp by opening and shutting all doors while double-clicking lock button on your key fob.

Close all doors, including the lid for the fuel-filler, and turn off the ignition. For 10 seconds pressing and holding the lock button on the key fob. The instrument panel emits a chime when this is accomplished. The chirp signalizes that the lid of the fuel filler and door are locked keys in subaru forester (click here for info). It is possible to change the setting to make the doors lock automatically without pressing a switch.

Step 8: Enter your 8-digit Transmitter Number

Write down the first series of 8 numbers and keep it in your wallet. Now, get into the driver's seat, shut the doors and turn the key in the first position. After 10 turns, your panel should sound once.

Then, open the case for the key fob and look for the circuit board of the transmitter inside. The circuit board should have one or two numbers with 8 digits. Take note of the first sequence of numbers, and follow the instructions in this guide to register the code in your vehicle's system. This procedure may require a visit to the dealer for older models.