• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

replacement upvc Door handle UPVC Door Handles

You can find the ideal handle for your door, whether replacing your existing handles or adding additional security. These upvc handle are easy to install and meet the 92mm minimum central distance for multipoint locks.

The backplate fixing centre and the lever/keyhole dimensions are the most important measurements. Check these measurements against your existing measurements prior to making a purchase.

Lever/Pad

Lever pad handles for doors consist of the lever handle on one side and a paddle shaped handle on the other. They are designed to be used with key wind locks, however, they can also be adapted to multipoint split spindle door locks (though you will need an additional dual spindle lock case).

Our range of upvc handle lever pads are available in a range of finishes. They will be listed in the drop down list after you have selected the perfect handle for your door. Certain types of handles are not available in all finishes. It is recommended to examine the technical drawing and dimensions for the item you are looking to ensure you get the correct size and fit.

It is essential that when choosing the new set of upvc lever pad handles, they match the PZ (distance from the handle spindle to the centre of the hole in the cylinder) of your multipoint door locks. This is because these must be lined up so that the bi-fold doors handle remain locked, whether you are looking from the outside or inside. The handles we sell are designed to work with a variety of conventional cylinder locks, however it is advisable to double-check before making a purchase.

If you are looking to upgrade to dual spindle levers you'll need to take out the handles that are currently in use and then disassemble the lock case. This will require an extra split cylinder inline. These can be bought separately, and we provide the complete technical diagram that you can examine in the images for each product.

Once you have removed the screws that hold the door handle you have, it is an ideal idea to loosen them and examine the mechanism to see the condition it is in. It is possible that you will need to loosen the screws a bit more if they are not tight, and then you can take off the old handle and spindle and replace it with a new door handle made of upvc. Before putting the handle in the frame, it is recommended to check that it is in the proper position, and you can do this by inserting your finger into the gap between the door frame and the handle to make sure it is in a level position.

Lever/Lever

The lever handles for doors are used to operate a multi-point lock using an euro door handles cylinder. They can be found on many upvc double doors as well as some aluminium and wooden doors. They come in two types, with the lever inside and a paddle on the outside. Sprung - they include a spring cassette inside the backplate to move the handle lever to an upright position. Non-sprung: These do NOT have a mechanism for bringing the handle lever to a horizontal position.

To fix the door handle of a lever that is sagging it is necessary to find the hole for access to the detent or pin, which is usually a small round or rectangle with a protruding hole located on one side of the handle base plate. Once located you can loosen the set screw with the help of a screwdriver, and then remove it to allow the lever, allowing it to return to the horizontal position.

Once the handle is in a horizontal position, you can put the screws back in place and tighten them until the handle stays fixed to the base plate. Consider applying a threadlocking product to the screw threads in order to increase grip and prevent them from loosening over time.

Drooping lever door handles could be the result of a number of factors. The most common reason is that the fixings aren't tight and the lever bearing to get tangled against the door. It could also be that the levers are not being operated at a straight angle and this is compressing the latch mechanism preventing it from fully springing back into service.

The most common reason for spring levers that are not functioning properly is the spring not being in the right position on the backplate. The easiest way to test this is to operate the handle to see whether it returns to its horizontal position.

It is important to fix any door handles that are loose immediately. This could cause excessive wear on the screws and the handle could fall off the base plate. It is also a good idea to tighten all screws that are loose on a regular basis to help to stop them from loosening.

Lever/Snib

These upvc door handles are also known as 'Snib' handle sets and have a snib lever towards the top of the lever that you can press down to lock your door if you don't have the fake lock. They are typically fitted with a Fullex 68PZ (that's 68mm between the spindle's centre and the lever or the lock centre) door lock. We also stock a variety of other door handles with 68PZ from various manufacturers, including Ferco and Fab & Fix.

Change your door handle is a cost-effective method to upgrade your home, whether you're replacing handles that are in use or fitting new ones to doors you've built in your house. There are a variety of door handles made from upvc available with traditional levers on backplate, curved or straight short latches and knob handles that resemble dummy knobs for multi point locks that are perfect for French doors.

Lever on backplate handles are typically rectangular in shape but there are also circular or oval shaped versions that are referred to as rose door handles. These handles are identified by a lever or knob that is mounted on the backplate. The backplate can be removed for hidden fixing.

These handles are available in a variety of finishes including chrome and coloured finishes to match your door and other hardware, such as knobs bolts and hinges. Some handles come with grub screw to attach the knob or lever to the spindle. Other handles come with bathroom spindles that can be used to operate bathroom locks. They incorporate a thumbturn turn and release mechanism, perfect for use on bathroom doors.

Mortise

The tubular latch is most likely to be the cause of this when your door handle made of uPVC is slammed shut. There are a few reasons for this, one of which is an unlubricated latch plate on the latch plate. This can be corrected easily by simply opening the door and spraying lubricant onto the handle and lock. It could also be that the latch is loose from the backplate. This can be a bit more problematic and would require a professional to fix it.

A multipoint door handle is a great solution to the problem of a door handle that is stuck. The handles are inserted into the faceplate of the door and are operated by an actuated thumb turn knob or key which activates an electronic cam that locks the deadbolt. The handles are available in a number of sizes that will fit various kinds of uPVC doors. They are also available in an array of attractive finishes that match existing hardware. These handles can be purchased online or from a local locksmith. They are simple to install and come with clear instructions.

You'll need to know your PZ size of your cylinder in order to select the right replacement handle set. This is the measurement in millimetres that lies between the outer edge of the door frame and the centre of the hole in the handle. You will also need to determine if the door is a hook style lock or a mortise style lock. Once you have these measurements, the simplest method to determine the right handles is to filter by brand option on the website. This will narrow down your options and you can then select the correct size from the list.

A typical set of handles and hinges includes the handle unit with a pair of various length screws drilling guides, as well as installation instructions. Smarter versions, such as the Igloohome Smart Mortise 2+ come with a mortice lock with keys. These are more complex models that are best suited to professional installers or highly skilled DIYers. Some handle sets include many accessories, such as weather strips, which can be used to enhance the appearance of the door.