• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Ghost Immobiliser 2

Guards your vehicle from key cloning and stops thieves from driving it with original keys. Our latest immobiliser is connected to the CAN data network in your vehicle and a unique PIN must be entered to begin the engine.

ghost 2 immobiliser installation, unlike trackers, doesn't emit radio frequency signals and can't be detected by diagnostic tools. It does not have any LED indicators or buttons that could signal its presence in your car or van.

Anti-key Cloning

The ghost immobiliser was designed to combat key hacking and cloning. The device connects to your vehicle's CAN data network and creates a unique pin code push sequence using the factory buttons on your dashboard and the steering wheel. This will stop the thief from being able start your vehicle. If the wrong PIN is entered, it will stop the engine from starting and making it impossible to leave with your joy and pride.

Ghost immobilisers use an innovative technology that is extremely difficult for thieves to beat. The ghost immobiliser unlike physical deterrents, like wheel locks or steering locks that are able to be cut, is a discreet electronic device. It's not even detected by thieves because it doesn't emit radio signals and operates silently.

This next generation immobiliser is equipped to shield your car from a myriad of threats, including keys that are duplicated, key-hacking, and even relay attacks. It also stops the thief from adding a key or replacing your ECU since it will not allow them to start your vehicle without entering the correct PIN.

In contrast to other immobilisers the ghost immobiliser 2 does NOT require a remote or key fobs in order to operate. It can be deactivated by using an app on the driver's smartphone. This is ideal for those times when you have to hand your car over for valet parking or maintenance without the key fobs.

The autowatch ghost installation birmingham Ghost-II is the latest version of our groundbreaking ghost immobiliser. It was designed to make it as simple and easy to use while remaining as secure as possible. This is done by integrating the Ghost-II into the vehicle's data network CAN, meaning that there are no wires to hide or easily found. It also comes with an integrated feature that allows you to disable your Ghost-II by connecting to the vehicle's Bluetooth, so you can enter and drive with no hassle.

OBD port hacking

OBD port hacking is a new technique employed by professional car thieves to steal cars. Thieves have access to your vehicle's OBD using the help of a laptop, mobile application, and cables that can be bought online for less than PS50. Once they have access to your vehicle's OBD port, they can do whatever they like, from resetting fault codes and tuning your car to taking away your pride and joy in under a minute.

If you have a Ghost immobiliser installed, it will prevent your car from being stolen with this method by requiring that an unique PIN code sequence is entered alongside the fob of your key in order to start the engine and then drive away. It does this by communicating with the vehicle's ECU (Engine Control Unit) on the CAN Data circuit, and is completely undetectable to any RF scanning or code grabbing technology. It even includes a Service/Valet mode that will allow your vehicle to be started without needing the PIN code.

You will also need cables with OBD pins, which are connected to the CAN bus. These cables are available on eBay or Amazon for around PS50. You'll also require cables with OBD pins that are connected to the CAN bus. These are available on eBay and Amazon for about PS50. The next step is to connect the cable into the wire harness of your car for example, the radio wiring harness.

Once the hacker has gained a connection to your vehicles OBD port, they are able to send diagnostics to the system at a high baud rate which will crash the CAN and block systems in your car from working. This could cause your car's engine to stall or even shut down.

There is no need for additional remotes or key fobs

The car immobiliser is an excellent piece of anti-theft technology utilized by millions of modern vehicles all over the world. Utilizing engine ECU software to prevent cars from starting if a fake transponder signal is sent to it an aftermarket immobiliser is an excellent way to safeguard your vehicle.

However, it could be simple for a burglar to get around an immobiliser system when they have access to the code that allows them to disable it. The battery in most key fobs is easily removed by removing it and a burglar can employ a simple tool remove the immobiliser's internal circuit board and replace it with an empty. Then they will be capable of starting your car.

The TASSA approved Ghost 2 is an immobiliser that does not require any additional keys or remotes. The immobiliser is directly connected to the vehicle's ECU (Engine Control Unit). This is accomplished via a discrete, quiet CAN data loop that cannot be detected by diagnostic tools such as the ones used by high-tech thieves. It also does not use a traditional key-fob with LED indicators, which means it's not visible at a glance.

There will be occasions when you need to deactivate Autowatch Ghost Installations Review 2's auto-protection for example, when you are doing the valet parking or servicing. Ghost CAN immobilisers feature a mode called 'Service Mode,' which is activated with just a click of a button on your phone. The car can still be operated, but the maximum speed is restricted to 36mph.

Contact us today to schedule a demonstration at our workshop. A member of the team will run through an in-depth explanation of how the system works and will provide you with owner's manuals, installation certificate, Ghost 2 emergency card and a security guarantee.

Simple PIN code change process

Ghost is the latest generation of device that protects your vehicle without cutting wires or installing aftermarket key fobs. It is directly connected to the vehicle's CAN data network. A personalised PIN can be set by pressing buttons on the dash and steering wheel. The system blocks engine start and cannot be bypassed because no RF signals are generated from the device. This makes it impossible to be detected using sophisticated scanning and RF techniques that are used by modern thieves.

The PIN code can be changed to block previous drivers, or even add an override code in case you forget the sequence. The installer will guide you through the process to do this during installation. The system includes a valet mode feature that allows you to temporarily disable pin input sequences so that your garage or mechanic can work on the vehicle without having to know the pin number. This is a great option for customers who don't wish their pin sequence to be divulged, but wish to leave their car with valet parking or service.

Unlike Thatcham products that require additional key-fobs to operate, Ghost is a discreet system which takes advantage of the buttons inside your vehicle to create a unique interchangeable PIN code sequence. This sequence is entered through the smartphone application. No extra LED indicators are used, and your vehicle is secured without possibility of being disabled.

Every vehicle is tested

Unlike key fobs that require you to press buttons on them and a ghost immobiliser can be discretely placed under your steering wheel or dash to make sure you are unaware it's even there. The device is connected to your vehicle's CAN data network and the personalised PIN code is programmed into it using buttons that are already present on your vehicle. The system then prevents the engine from starting until this code has been entered prior to. This means that thieves cannot copy the keys to your car or use the OBD to hack into it.

ghost immobiliser installer can be fitted in all vehicles including electric cars, vans motorhomes and bikes. ghost installation is also extremely flexible and can be programmed to turn off in a variety of situations. It is possible to program it to enter Valet mode, for instance when your vehicle is transported to a valet company or parking company. This allows you to drive your vehicle within a speed limit of 30 mph, and the ghost immobiliser will activate itself when your vehicle is returned to your home.

Another excellent feature is that the device can be reset to your personalised PIN code at any point. This is beneficial if you forget the code or the device becomes inoperable which means it's like new.

It's also important to note that the device is completely inaccessible to those who aren't familiar with it. It does this by running through the buttons on your dashboard and steering wheel and analyzing the data they transmit to determine the exact button that was hit. This makes it a safe and solid security system that is not able to be tampered by RF scanning, jamming, or door lock pick set.