• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Sash Lock Door Handles

If you're looking to improve the security of your home without compromising aesthetics, go for sash lock door handles. They're used with mortice latches or sash lock. They can be paired with a night latch to provide additional locking for doors inside.

The handles consist of a handle/lever on a backplate and are generally used with a three or five lever mortice lock. They can also be combined with a tubular latch.

Lever Lock Handles

There are a variety of lever handles that can be matched to any decor. The rustic lever locks are very popular in both farmhouse-style and modern homes. Classic lever handles are round or spherical and are easy to grasp. They are easy to use, inexpensive and fit in with any style of home decor. Choose satin nickel or polished chrome handles for a classy appearance. These finishes are easy to clean and are durable. Other choices include antique bronze and polished brass. A majority of levers have a unique design, like small amber worm eyes, or long-horned crystals. Some levers have a pin, star or other shape molded in the bottom.

To change the lever lock door handles, first make sure you have the right screwdriver or a tool to disassemble them. You may need an awl, or a nail based on the model and design. Some lever handles come with an oblique notch or hole at the base of the handle that can be used to pry them open.

Follow the manufacturer's guidelines for removing your existing handles after you have the proper tool. Make sure the spindle is in place on your new lever. Existing doors are often morticed (cut into the door) for latches that were previously used or locks, and need to be fitted to a specific spindle size. Most lever handle manufacturers employ the standard spindle for door handles.

If you are replacing the handle of a sash lock the old handle should be removed and the tubular latch bolt, which is in the door, must be removed from the strike plate inside the door frame. You will then need to drill a hole in the door frame, then insert the latch bolt through, and connect it to the strike plate inside the door frame.

It is important to remember that when installing the lever handle for the first time all handles that are compliant with the ADA (Americans with Disabilities Act), are designed to operate with a hand. The user should not be required to grip their hands tightly or twist their wrists. To be in compliance with ADA compliance standards, the lever door handle can't be operated by using fingers and thumbs or even the entire hand.

sash windows repair Lock Handles

The primary purpose of double glazed sash windows wood lock door handles is to pull the moving sashes together tightly to create a seal. This stops drafts from entering the room and also helps maintain interior home temperatures, saving energy bills throughout the year. They are also great for doors that don't need the security of a keyed locking system.

Sash locks are often referred to as mortice sashlocks and combine a dead bolt and latch into a single case that is inserted to the surface of a door. They are used in conjunction with door handles and are available in a range of choices.

The lever handles for locking is operated by a lever that has a hole cut in the backplate below. This allows a key that is inserted into the mortice frame to operate it. This lock is most commonly used on non-locking interior doors like those in living rooms and dining rooms. However it can also be used with a tubular lock to create an extra secure door.

These are designed to hold the sash in place for multiple times, and have hooks that fit inside the keeper. These are available in various styles and designs that are suitable for different window types such as hinged or sliding sash window casement windows. Some are made from cast aluminium, others from brass and even wrought iron. These are available in different finishes to match other elements of the door furniture like escutcheons, which protect the keyhole.

3 lever sash lock handles are suitable for doors that are internal but not external ones, as they don't offer the security level required by insurance companies. They also have a lower resistance to forced entry, making them more vulnerable than their certified 5 lever counterparts.

A door sash that has five levers is the best option for external doors. It offers greater levels of resistance to forced entry and is more difficult to bypass or pick. These locks are a new design that has been tested and approved to meet the strict building, fire and disability regulations.

To replace a handle on a sash-lock remove the old fastener from both ends by removing the screws. Make sure you have a screwdriver available and separate the parts carefully to avoid damaging them. Mark the screw holes with pencil to ensure that the new fastener is properly aligned when you are ready to install it. Clean any paint or dust flecks, and then screw into the new fastener. It is essential to test the handle to ensure it operates correctly and creates an effective seal.

Tubular Latch Handles

The tubular latch is a latch mechanism that is located inside a door, and is operated by turning your handle. It is designed to close the door however it does not lock the door as a mortice lock would. These are most often used on doors that are internal and no locking is required. They can be equipped with lever or knob handles.

Tubular latches are available in various sizes. They range from basic to high-end architectural quality. The size you select will depend on the use of the door as well as whether you require a lock function. For instance the bathroom door might need to have a thumbturn and release mechanism in case in an emergency, therefore you'll require an latch that can be locked.

The backset of your door will influence the latch you choose. This is the distance between the edge of your door and the centre of the hole for the door handle rose/knob, and you must select a latch with the same backset measurement. This will ensure that the handle/door knobs are able to operate the latch with ease.

If you are installing a knob or lever with a spring, or without a spring, it is crucial to select an extremely robust tubular latch. It must have a double glazed sash windows wood-sprung follower. This will provide an effortless operation for the latch and keep it from becoming slow and ineffective with frequent use.

After you have chosen the correct latch for your needs The next step is to install it onto the door. The first step is to make sure that the latch is leveled to the top of your door frame/casing. Mark the position of the plate and drill holes. Countersink drill bits can aid in creating the right recess to allow it to fit comfortably.

Once the latch is set after which you can attach it onto the door. It is important to check that it is functioning properly before fitting your door handles and putting in the locks, so be sure to test it by closing and opening the door several times. If it's not working correctly, try lubricating the door with WD40. Then, try it again. If you are still experiencing issues, it could be necessary to speak with an expert locksmith or installer.

Keyhole Handles

Keyhole handles work with a tubular latch that is installed inside the door. This latch is used to open and shut the door. When the handle is pushed down, the handle engages the latch, and pulling it up, it releases it, allowing the door to be opened. These kinds of handles are usually used on doors with internal openings like living rooms and doors to dining rooms but can also be fitted to front doors if they are paired with a nightlatch.

Door knobs are a modern type of handle that combines a sprung lever/handle on a square or round fixing rose, with an accompanying thumb turn or escutcheon. They are available in a broad variety of styles and finishes to fit different doors around the home. They can be used with Euro cylinder locks or multipoint locking systems to provide an additional layer of security to the door. This is achieved by locking the door at multiple points along the height of the door. Compatible door handles require the correct lock center dimension to accommodate the barrel.

Keyhole escutcheons are an escutcheon that covers the door's existing keyhole to hide it from view and create an elegant finish to the handle. They come in both the screw or pop on style and are available in a variety of finishes that match the door handle. Additionally, a recessed escutcheon can be fitted to the door's edge to conceal the keyhole and give it a more modern look.

Some of the handles are compatible with Euro-cylinder locks. These are used on upvc sash windows doors and require door handles that have a Euro cylinder cutout and suitable screw holes inside the backplate to accommodate the euro cylinder. These handles could also require a Euro-cylinder escutcheon, or a standard escutcheon, depending on the purpose for which they are used.

When choosing mortice lock or a sash lock, or a tubular latch for your door, it's essential to know the distinct features of each and the requirements they require to be compatible with the other components of your uPVC door system. It is important to take into consideration the door thickness and the door hinges, the frame reinforcements, the size of the backplate to the handle, the lock centre dimensions and the screw centers on the cylinder.