• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Cat flaps let your cat leave and come back whenever they want without having to let them in or out. They also help prevent your cat from toileting in the house.

It is easier to install the cat flap on a upvc door panel with cat flap fitted panel than on a glass one but you'll require some expertise and appropriate tools.

Measure the Door

The installation of a cat flap inside the door isn't easy however, as long as you use the correct type of cat flap be patient and follow the steps provided it should not prove to be too much trouble. We will help you mark the shape and use an jigsaw to cut out the door's area. Then, we'll finish the job by attaching the flap. This will ensure the flap remains in place and shields the doors from damage caused by rain and wind.

The first thing you need to do is determine the width of your pet to get a precise measurement of what size of cat flap you'll need. This will ensure that the flap is big enough that your pet can enter and leave the house without having to open and close the door each time, but also small enough to prevent them from going too far in either direction.

Once you have the measurements you can mark the location on the door where the template should be positioned, usually, this is done using an X, but some kits include an illustration that outlines where to drill. If yours does then stick it to the door and use a pencil to draw around the door. If your door has moulding or a sill at the bottom, make sure you leave enough space between your cat and the moulding or sill.

Use a set square to make sure you are cutting correctly and ensure that the hole is a good rectangle shape. When you are satisfied with this, you can begin to remove the remaining door material. If you have a square that you have cut, make use of it to verify whether you're cutting in the right way and also to ensure that the hole is a good rectangle. Once you are happy with this you can start to remove the rest of the door material.

Draw a Line

The cat flap is a great method to allow your pet to go out and in without worrying about them being a nuisance to a visitor, or leaving unwanted gifts inside the house. It also prevents draughts, and helps keep your home's temperature stable. The installation of a cat flap your door can be a daunting task to those who haven't tried it before. A lot of people will hire an expert carpenter or joiner to do the work. While this is definitely an option, it's possible to do the work yourself if you own the proper tools and follow instructions carefully.

This is much easier to do on wooden doors, but it is still possible using uPVC. However, you must be careful not to damage the doors as this could invalidate your guarantee. The first step is to take measurements of the door to make sure it will accommodate the new cat-flap. If you have a standard uPVC panel it's easy. However when your door is composite or a different type of door, you might have to be more cautious.

The next step is to determine the height of your belly for your cat. This is the distance from the floor to the bottom of the cat's stomach, and you'll need locate a place near the door where this measurement will fall within the range your cat is able to comfortably walk through. Once you've got the information you'll need to mark the area with a spirit level and a pencil, so that you are sure that the hole will fit your cat.

Once you've marked the area, it's time to make the hole. You will require a jigsaw and it is essential to take your time to ensure that the cuts are smooth and clean, rather than uneven and rough, as it could cause damage to your door. Wear safety glasses and a dust mask while using a jigsaw. Inhaling sawdust can be harmful for your health. After you've cut the hole, you will need sandpaper to smooth the edges so that the cat flap is easily fitted into place.

Cut a Hole

Getting a cat flap fitted to an existing door panel or double glazing sealed unit can be quite difficult. If you are not very skilled in DIY, it is best to employ fitting a cat flap in a upvc Door professional to do the work for you. A mistake could not only be unsightly and unattractive, but could also be a security threat. It could allow cold air in when the cat is outdoors and hot air to escape when it is inside.

The first thing you have to do is mark out the location of the hole in the door using a pencil and a spirit level. This will ensure that it is correctly placed and runs flush with all the other parts of the door. Make sure you have some sandpaper in your possession to smooth any rough edges.

Wear the safety equipment you'll need to use an electric tool. If you're worried about noise, you can get a jigsaw with a cord that is quieter and more user-friendly.

It is best to only remove the material needed to make the cat flap. A little bit of extra material will be needed to cover the thickness of the the cat flap itself but removing more than that can cause problems or cause damage to the door frame.

A door made of replacement upvc door panels with cat flap may have a metal frame or a panel inside that will interfere with the microchip cat flap and in this case you will need to cut an over-sized hole to ensure that the metal doesn't touch the wall of the cat flap, if this is the case, it is crucial to fill in the oversize gap and render it watertight.

If you are Fitting cat flap in upvc door Panel the cat flap installation cost flap onto an upvc door or a double glazed windows with a frame made of metal, you will need to speak to a professional who will provide you with a brand new pane of glass with the hole for the cat flap already drilled in it. This will be cheaper than trying to install a cat flap fitters flap in an existing pane of glass that was not designed specifically for this purpose.

Fit the Flap

Cat flaps let your pet move around as they please, giving them the freedom to relax inside the house whenever they want to. However, if you have a uPVC door it can be difficult to install an animal flap, especially when you don't have glass panes that can be cut for one. If you're willing to buy and install a new half-glazed uPVC panel then it is possible to install the cat flap to these doors. It's not a simple matter of cutting an opening in the door. You'll also have to do a few things to ensure that it is secure.

A uPVC, GRP or composite door panel typically comprises an flimsy plastic outer layer joined to a soft insulating polystyrene core. It is crucial to be careful when cutting the material. This type door has a template can be used to cut the hole.

After you have marked out the hole in your front door, it's time to put in the cat flap. You can purchase and install various models, from basic button operated ones to ones that are activated by microchips that allow only your pet. However, no matter what type of cat flap you select, it's important to make sure that your cat is able to use the flap and not get trapped in the weather.

It's a good idea to select circular fittings instead of one that is square, since circles can be more securely cut into door glass. This is because square holes make glass more vulnerable to cracking if drills are used on it. This is also a safer choice because you won't need to drill into the toughened glass, which could shatter and harm your pet or family. This is particularly important if you have child or an elderly person living in your home who may be injured by shards glass.