• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Peugeot 308 Key Fob Problems and How to Fix Them

If your peugeot 208 key fob not working 308 key fob stopped working for a while it could be due to a dead coin battery, water damage the receiver module or a defective electronic chip. Fortunately, all of these are simple to fix, and you'll have your car back to normal in no time!

Car keys can also become faulty because the key blade gets worn. You can easily solve this issue by visiting your local Car Key Man Auto Locksmith to replace the blade.

Battery

The battery that powers the key fob on your Peugeot 308 can sometimes die or become too weak to send an intense signal to your car. The key fob can stop working and prevent you from locking or unlocking your doors, or even starting your engine. To fix this issue, you'll need to replace the battery inside your key fob.

You can purchase a new battery at an auto parts store, or at your local hardware store. When you purchase the battery, ensure that it's new and hasn't been sitting on the shelf for a long time. A new battery has more capacity and will transmit a stronger signal your car.

After replacing the battery, try unlocking and locking the doors of your Peugeot with the key fob. If the doors aren't unlocking it's likely that the issue lies to be in the receiver module of the car which can be changed by your local Peugeot dealer.

The internal chip of the key fob can also be damaged. You can cause damage to your key fob when you drop it on the ground or expose it to moisture. The rubber seals that protect the chip from moisture could be worn down over time, particularly if your key fob is exposed to water for long durations, like submerging it in the ocean at the beach. To avoid this it is recommended to keep your key fob away of the reach of moisture and away from water.

Water Damage

If your key fob becomes wet and soaked, whether you dropped it into the pool or fumbled it into a puddle don't think it's a lost cause. While the key fob has rubber seals which should shield it from water, long-term exposure to water could cause damage to the electronic chip. Water is a good conductor, and any water that gets inside the key fob could cause an array of short circuits that eventually destroy the electronic chip. After taking the battery out, clean the contacts with isopropyl alcohol, and dry it off completely before putting it back in.

A dead battery might be the reason why your Peugeot 208 Keys 308 won't start. Jumper cables are a great option to restart the engine when you have an extra car. If the battery has a problem, it must be replaced.

A bad receiver in the car could also block it from receiving the signal from the keyfob. The key fob could be damaged or there may be a problem with the antenna, wiring or the key fob itself. It could be necessary to program a new keyfob for your vehicle if using one. If you're unable to fix the problem yourself seek out an expert technician. A technician who is trained in the field will be able to detect the issue quickly and fix it immediately.

Radio Interference

For example, a key fob not being recognized or having a restricted range of operation usually mean there is a problem in the system. The interference could be transmitted or radiated, the latter being caused by power and speaker cables that are too close to electrical parts. In general, rerouting cables and moving them away from these components will solve the issue.

It's unlikely someone is watching your key fob's signals in the intention of stealing your car It's possible, however, that radio interference has ruined the signal. Luckily, this is a simple issue to repair.

If your key fob is not being recognized by the system, you can try replacing the battery. Make sure that the battery is the right size and type. A wrongly sized battery can cause damage to the fob.

These devices could interfere with the key signal if they are using the same radio frequency. It is recommended not having these devices attached to your key fob.

Pairing Issues

The remote keyless entry system in the car is equipped with an antenna that receives radio frequencies from the key fob. It will not be possible to start your vehicle if the receiver is malfunctioning even if your key fob is functioning and can be reprogrammed. The issue could be caused by a variety of things, including a dead coin battery and water damage. The receiver may also be malfunctioning due an error in the software or internal damage to the key itself.

One of the most frequent reasons why your Peugeot 308 key fob doesn't work is that the coin battery inside has gone out of service. This battery can be replaced, but you must ensure that it's the appropriate battery for the keyfob. It is recommended to use batteries that are the same size, voltage, and specification as the original.

Your Peugeot 308 keyfob may not work if it is associated with another vehicle. This can happen if have given your key fob to a friend or it has been used to unlock and start other vehicles. This can be solved by reprogramming your key fob using an OBDII scan. This tool will request information about your vehicle, including its VIN or engine type. It is vital that you enter the correct information.