• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

How to Unstick a suzuki key cutting Ignis Key

suzuki key cutting's quirky, cheap little city car is getting a midlife refresh. It's not a supercar, but it eats up dirt roads in rural and urban areas with gusto, while its unique turning circle makes town centre driving a breeze.

The new model also packs smart safety and driver assistance features - including lane departure warning and a drowsiness alarm which is a welcome feature on long drives.

Steering Lock

The steering lock is a vital security feature to avoid your Ignis from being stolen while it's in drive. It's a good safety feature however it can be a hassle when you're in a hurry and are unable to unlock your wheel. There are some simple actions you can take to solve the issue.

Check first that the ignition switch is set to "on". If that's the case, try turning the key in the same direction as you did prior to the time that the wheel was locked. This may be a bit tricky but it's usually enough to unlock the wheel.

If the wheel won't open after spraying canned air in the ignition cylinder grease the cylinder. Be sure to wear eye protection prior to doing this so you do not get any air that has been sprayed into your eyes! Liquid graphite is also a good option to make the cylinder more lubricated.

If none of these options work, you'll need to replace the ignition lock assembly. Luckily, this is an easy part to locate at any auto parts retailer. Be sure to buy an exact replacement and then compare it to the original. Remove the cover on the ignition and inspect the entire assembly.

Worn

The steering lock can be a bind to the ignition switch, causing the key to get stuck. This safety feature is designed to stop your Ignis from moving while the engine is running. If this happens, manipulating the steering wheel will release it.

Over time the Ignis keys wear out and become difficult to turn. It's not as common as a defective ignition switch, but it does occur. If this is the case, you must replace your key.

Check to see if something is preventing your Ignis ignition key from entering the cylinder. There can be dirt or debris which can become stuck inside the ignition cylinder and prevent it from turning.

You should also try using a bit of lubrication to see if that aids. You can purchase a variety of lubricants at your garage or at a local auto parts store.

A silicon "glow-in-the-dark" key cover is an alternative. These covers absorb light and release it when in murky or dark conditions. They also protect your keys from wear and tear. They are offered for the majority of suzuki key cutting models, and are available online or from a nearby suzuki Grand Vitara key Replacement dealership.

Bent

A key may become bent over time. The teeth of the key may not be able to engage with lock cylinders the same way. This can prevent the key from turning. If this is the case, the key will need to be replaced. It is a good idea to duplicate your spare key and keep it in a secure place.

The cylinder for ignition can wear out. If the lock pins in the cylinder get stuck or stuck together, this can prevent keys from going all the way in or out of the cylinder. This can be solved by replacing the cylinder however, it is recommended to replace the cylinder prior to the key gets stuck in the ignition.

If your Ignis key still stuck after trying the simple fixes it's time to consider lubricating the cylinder. Graphite, or liquid graphite, will help the lock pins to move more freely, and thus free your key from binds. This can be found in most auto parts stores. When applying the lubricant, ensure that your ignition is in park. Do not try to manipulate it to loosen it. This could cause more serious problems.

Broken

If you've tried all the easy methods to make a key remove its stick but it's still unable to move, the last option is to apply fluid to get it moving. You can buy this lubricant at your local auto parts shop and apply it with the help of a cotton swab or rag to the inside of the lock cylinder. Move the key back and forth gently to spread the lubricant and then try again. If you can massage it forward, do so but do not push too hard or you could break it off in the cylinder.

The key's internal circuitry may be unable to function due to wear and tear. It's not as common as it sounds, so you'll need to make a duplicate of the key.

The case of the case of your Suzuki key fob can become worn or damaged. This is especially common if you are using a cheap replica key fob with a rubber or plastic shell. The Key Crew may be capable of transferring the internal circuitry of the old keyfob to a replacement key for suzuki sx4 case depending on the circumstance. This will save you the expense of buying a new keyfob. We'll let you know the possibility for your particular situation when we call to schedule the service.