• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Unlock Your Car With Shoelaces

Many cars are now fitted with advanced security features. However, older models usually still have post locks that can be opened using a few simple methods.

Some car manufacturers also have mobile apps that can unlock your vehicle. Check with your automaker to see if they offer this service for you.

1. Shoelaces

If you are able to use them, shoelaces could be a great device when you're locked out of your car. If your vehicle has a locking tab that slides up and down vertically, typically near the window, you can unlock car service it with a pair shoelaces.

First, take the shoelaces from a pair of shoes that you're not wearing, then tie a slip knot through the middle of the shoelaces. Bring both ends together to form a loop about 3/4 of the length of the shoelaces. Then, you can slide the knot down into the crack between your car opener service door and its frame. Then, adjust the shoelace until it hooks around the lock mechanism. This can take a little time and trial but when the shoelace has been secured to the lock mechanism, simply pull it up on both ends to unlock your car.

The most important thing to keep in mind when using this method is to take your time and be sure not to scratch or damage your car during the process. If you are able to successfully apply this method to open your car, it can save you the cost of roadside assistance or a locksmith service and get you back on your way in just a few minutes.

This is a great alternative to more abrasive methods, such as hanging from a hook, which can scratch your vehicle. However, it may not always work, particularly on more sophisticated models. In the event that your car's locking mechanism does not respond to this method, a long wooden rod or a screwdriver could be required to open the lock open.

2. Coat Hanger

Being locked out of your car is among the most frustrating things that can happen in our modern world. Many people may have seen their father or uncle use coat hangers to open the car door when they were younger However, this method can be risky and might not work on all cars. The use of a hanger to open your car may damage your door frame and could be illegal in certain states.

A simple coat hanger made of wire can be used to unlock a car by slipping it in the gap between your door and door frame. Slide the coat hanger into the gap between the door and the frame. Bend it into a small V to ensure it has a firm grip on the lock. Pull up on the hanger and you will let go of the pin that controls the lock. You may need to move the hook a few times to catch something that will move the lock. It should not take a lot of effort to lift the bar.

If you're unable to reach the hook of the coat hanger out of the control arm, you can put it in between the window and stripping. You may have to look around with the hook end of the hanger to locate this spot however once you've located it, you can jiggle and wiggle the hanger until you hear your door open. This is a risky method however it can be a reliable method to gain access to your vehicle with no key or assistance from a professional. If this doesn't work you can always call a roadside assistance company or locksmith for more help.

3. Wooden Wedge

Keys can be lost quickly if you erroneously or are careless. If you don't want wait for AAA roadside assistance, or a locksmith to arrive at your location You'll require an easy method to unlock your vehicle.

You can use just about any object that can create a space between your door and frame, like coat hangers, a tennis ball, or even a screwdriver. You may need to spray air into the gap to get it wide enough for your tool to fit through and reach the lock. Be careful not to scratch the car.

When they lock their keys in car locked out in their car, a lot of people reach for a pair pliers or another tool. But, it's better to select a tool that will not scratch your paint or aluminum trim. Inflatable wedges are ideal for this task and are available in a variety of sizes to fit most doors.

Another alternative is to use a long strip of plastic folded in half, such as a grocery bag. Slide the strip inside the door that has been pried open and, once it's at the lock then wrap it around the knob and pull it upward. This method can be a bit messy, but it's faster than the coat hanger or screwdriver that can be difficult to control.

If you own a brand newer car, the lock mechanism may not be in the traditional handle on the outside, but instead on the top of your window, right next to the weather seal. To unlock a vehicle with this type of lock, you will need bend the wire hanger's tip to form hook. Slide it into the gap between the door and window (or weather stripping) until it reaches the locking lever or switch.

4. Air Wedge

Locksmiths and repo professionals use air wedges such as this one made by HPC to make more room around the window frame of the car to allow them to enter tools easily. They are also a great option to prevent damaging the vehicle while gaining access without keys.

The air pump wedge operates by sliding between the door and the weather stripping on the door to an area where the correct pressure is applied. A hand pump manual is then used to fill a bag that separates the vehicle's door from its window, creating an opening large enough to fit an auto unlocking tool. This allows you to break the manual lock mechanism and open a car door without a key.

A good air wedge should have a stiffener that prevents it from collapsing when it's pumped up, and a release valve to avoid over-inflation. It also comes with a durable, non-marring vinyl bag that is designed for a variety of applications. The wedges are best when used with a long-reach automobile door unlocking tool or a picker that can be put into the wedge.

This method is not recommended to open a car door by an individual. This could cause damage to the vehicle which could require costly repairs at a bodyshop. Additionally, this is not an ideal method of getting into your vehicle in the event that you've locked your keys in car locked out inside.

It is recommended to contact an experienced roadside service to help you if you're stuck. They will send a technician who is trained and experienced with the correct tools to open the vehicle door without damaging it. They can assist with battery replacement and towing, among other things.

5. Rod

A rod is a long piece of metal, usually cylindrical or tapered, that supports something else. In the car, it can be used to make an opening through which you can access your keys and unlock the door. This method isn't easy to maneuver however it's worth a try. If you're lucky, it will work.

If you're not at ease opening your car You can ask someone else to help. You can also hire an auto locksmith. You can find a locksmith near you using the phone book or on the internet. Another option is to get an AAA membership, which provides roadside assistance. This service will send a person to your location fast and will be able to unlock your vehicle without difficulty.

Many newer cars have security features that prevent people from entering them without a key. Older models are simpler to get into. You can unlock these vehicles with a coat hanger or a rod. To do this, you need to separate the coathanger from the hook and bend the straight end into hook. To create an opening, slide the hook behind the weather strip into the slit in the door. Then, insert the rod and move it to press or slide the car's door lock switch.

Some automakers offer smartphones with apps that can help you unlock your car if you're locked self out of car out. BMW and Hyundai, for example offer lockout applications that let you unlock your car using the smartphone screen. Other automakers, including General Motors, have an OnStar program that can aid you unlock your car if it's locked out. To access these apps, you'll require an iPhone 11 or later or Apple Watch Series 5 or later running the most current version of watchOS and be within Bluetooth range of your car compatible with Bluetooth.