• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

How to Select Electric Heaters

electric log effect stove heaters offer a range of advantages, including a lower initial cost, low maintenance for the homeowner and an efficient way to warm your home. They are also more convenient than heating systems that require venting.

You can save money on heating expenses If you are a customer of an electricity company that offers Economy 7.

Temperature Settings

The ideal situation is that your electric heater permits you to adjust and maintain the temperature you want without needing to turn it off or off. This will conserve energy and prevent you from leaving or entering an area that is too cold. Look for a thermostat, and if possible one with timer functions.

When selecting an electric portable radiator heater heater, make sure it's rated for your space. A heater that is too small will need to run longer to achieve the temperature you want. This wastes energy and can cause your room to overheat. Utilize our calculator to determine the ideal heater's watts per square foot for your area.

Also, make sure that the temperature adjustment knobs are easy to access and adjust. You may need remove screws or peel back insulation to reach the knobs, if they are set in a recess. This could be a problem. Make sure you are using the recommended temperature range for safety and efficiency. Temperatures lower than 120 degrees could cause the growth of bacteria and increase the risk of the possibility of scalding. When temperatures exceed 140 degrees could pose an hazard to fire.

The Everhot is a beautiful, compact heater that can be utilized in conservatories or as the company says: "annexes... narrow boats... shepherds' shelters... glamping pods." It reaches 200C, making it an ideal option for cooking as well as heating. It has a timer and an ECO setting which optimizes the heating and power settings to make it more efficient.

It is also very quiet. There's no fan noise or whirring sound when you change the settings. This makes it a great option for bedrooms or living rooms. It also has a few other useful features, such as an inbuilt nightlight that turns blue when the heater is turned on and a built-in humidifier which can be switched to intermittent mist mode for a more subtle effect. It's also safe and sturdy, with a tip-over shutoff switch as well as a protection against overheating that shuts down the unit if it gets too hot. It is also UL-listed to ensure security.

Safety

Electric heaters should be used with caution. Fire hazards from heaters and carbon monoxide (CO) poisoning are especially dangerous to children, elderly people and those suffering from chronic health issues or immune system disorders. Pets and children may also knock the heater over and cause injury or even death.

ESFI recommends checking a heater's plug, cord and outlet periodically. Find indications of damage, like damaged or loose plug or a frayed cord. If the cord or outlet is hot, consult a qualified electrical contractor to repair it. Never plug in multiple electrical devices at the same time as space heaters. This could cause overload to the outlet and cause it to overheat.

It's a good idea also to use heaters that have been listed or identified by a nationally-recognized test laboratory, such as UL. These heaters are more likely to comply with voluntary safety standards. Avoid placing a heater near flame-prone materials, like carpets or fabrics. Keep a minimum of three feet between the heater and the combustible material. Also, don't put heaters in bathrooms or kitchen and do not use it if you're in a wet state.

Also, make sure to connect an electric heater directly to an outlet in the wall. Do not use a power strip. If you have to use an extension cord, make sure you choose the most compact heavy-duty cord you can comprised of 14-gauge wire. Also, look for loose outlets, which could be a sign of an overloaded circuit.

Keep an electric space heater at least six inches from anything that could cause. It's recommended to place a space heater on flat surfaces instead of putting it on tables, cabinets or furniture, which can cause fire if it overheats. The last thing to do is disconnect and shut off the heater prior to leaving the room.

Making sure you are taking the appropriate safety precautions when using electric heaters can prevent injuries and reduce energy consumption. As temperatures drop, facility managers often turn to electric heaters to provide extra warmth in office spaces and common areas. Preferred Climate Solutions can install and maintain outdoor or indoor electric heaters to help ensure that your workplace is as comfortable as is possible in the cold winter months. Contact us today to learn more about our heating solutions.

Energy Efficiency

Consider the energy efficiency of a portable heater when making your decision. This refers to the amount of electricity needed to generate the desired amount of heat. Heating systems that consume less energy are more efficient and lower the cost of heating your business or home.

The heating element is utilized in most electrical heaters to convert electrical energy into warmth. It is made up of a coil, ribbon, flexible heater element, or tubular element which emits heat when an electric current flows through it. The amount of heat generated depends on the kind and method of heating element (convection radiation, convection).

If you are concerned about environmental impact, look for a model that uses an environmentally friendly type of energy. It could be a renewable energy source or a substitute to fossil-fuels such as solar or wind.

The efficiency of electric stoves fires heaters is also affected by where and how electricity is generated. Electricity derived from a wind or solar power plant is more efficient than electricity produced by burning fossil fuels at a power plant.

Apart from selecting the heater that makes use of an environmentally friendly type of energy, you should consider a heater that comes with various built-in energy saving features. These could include automatic shutoff mechanisms that activate in the event of an overheated unit, or if a unit is accidentally tipped.

These safety measures can be helpful to protect your employees or family members, and they could also contribute to lower energy bills by helping you avoid excess usage. A lot of portable electric heaters are engineered to operate quietly as well, making them ideal for offices, bedrooms and other spaces that require a peaceful atmosphere.

Another way that an electric heater can save you money is by cutting down on the number of maintenance calls that you'll have to make. Gas units are more costly to repair than what electric heaters are best ones and maintenance costs could be costly over the course of time. Electric models are generally cheaper to maintain, and they usually come with more advanced features that can help you to conserve energy.

Installation

Electric heaters use the Joule principle that converts electrical energy into radiant warmth that warms a space. They're also extremely efficient and affordable when compared to other types of heating systems, particularly gas. They aren't suitable for all households and can overburden an existing electric system. Therefore, it's best to have a professional electrician check whether the current system can handle the extra load of an electric wall heater prior to installing one.

There are many aspects to take into account when choosing an electric heater, such as the type of heater you choose and the space in which Electric heaters are most efficient you wish to place it. The type of heater you choose will determine how much it costs to operate. A baseboard heater that is electric can cost more to run than an electric space heater or a portable heater, but it offers more even warmth and won't require any vents or chimneys.

An electric fan heater has an air blower that produces hot air and circulates it in the room. This type of heater is usually most economical to run, however it can be noisy and takes longer to warm the room than other types of electric heaters.

Find a heater that comes with a thermostat. This feature allows you to set a temperature target and the heater shuts off automatically when it attains the temperature. This can significantly reduce your consumption of energy and keep you from turning the heater on and off.

Before installing an electric heater, ensure that the power is turned off at the breaker panel. You can also confirm that the circuit is shut off using a test device. Then, mark the spot where you intend to mount the electric heater on the wall and cut an opening in the drywall. Use a drywall saw to cut the required section, making sure not to cut any electrical wires or pipes.

Use a cable 14/2 of the same length and gauge as the existing wires, from the breaker panel up to the wall opening. Connect each wire to the screw available in the outlet box by removing approximately 1 inch of insulation. Identify this wire as the "line" by labeling it or marking it with a piece red tape. Then, connect it to the wire leads with the label "load" in the thermostat box.