• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC windows are a fantastic choice for modern homes. They are long-lasting, durable and easy to maintain. Unlike timber and aluminium, they don't get rusty or decay.

Cleaning and lubricating regularly UPVC windows and doors is essential. This will prevent unnecessary repair costs as well as increase energy efficiency.

1. Broken Glass

The damaged glass in your windows can cause significant damage to your home and may even be fatal. It is essential to take the time to make sure that you're doing all you can to ensure that your windows are in good condition.

Single-pane windows are fairly simple to replace, and they typically fit into old frames very easily. However, if you have double glazed window repairs pane windows that are anchored by internal beading it will be more difficult to get rid of the existing panes and install new ones. In this situation you'll need to source some plastic spacers that aid the new pane in being able to fit correctly into the frame of the window repairs near me.

If you're planning attempt to remove the window panes by yourself it is crucial to wear the proper safety gear that includes gloves with a thick layer of material and protective eyewear. It is also a good idea to lay down a drop cloth prior to when you start working on the glass to ensure that any shards fall on the fabric rather than on the floor where they could be trampled on and cause further damage.

It's a great idea to tape the gap once the glass is removed. This will stop water and drafts from entering your property until a professional arrives to fix the window. This will also act as a barrier that will prevent any intruders to gain access to your home. If the gap is large, you might think about a security door that has an integrated window, since this will offer the best of both worlds.

2. Sagging

uPVC windows and doors are a low-cost energy-efficient, durable and long-lasting alternative to timber sash windows. As time passes, they may develop a variety of issues such as sagging. A sagging uPVC window could cause issues with light, draughts, and even security. If you find that your uPVC window is beginning to sag it is important to act swiftly to stop the issue from becoming worse.

To repair a window that is sagging, you can try to reposition the hinges. First, you'll need to unblock the windows so you can get at the frame. Then, remove both the top and bottom hinges with a screwdriver and adjust them clockwise or counter-clockwise. After you've repositioned the hinges, close the window and test it for an appropriate fit. If you are happy with the size of the window, you can tighten screws to keep them in place.

If you aren't able to move the hinges, you might need to replace the seal. Over time, rubber seals lose their elasticity and become dry which causes them to lose tightness. It is essential to replace your seal as quickly as you can to keep your uPVC window waterproof and draughtproof.

UPVC handles can also loosen. Often this is due to screws that have become loose over time. However, it could also happen because the handle mechanism has worn out. Luckily, it's not difficult to repair the loose uPVC window handle yourself. The first step is to close the window and then perform a test to ensure that it fits. The corner joints of the sash must align with the casing joint. If it isn't then you can make use of a screwdriver to loosen the handle and turn the mechanism back into position.

3. Water Leaks

If you wake up to wet floors and mouldy walls every time it rains it's crucial to take action. Water leaks through windows can cause structural damage to your home and also impact your ability to regulate the temperature in your home. Most often, uPVC window leaks are caused by a damaged or missing sealant.

This is a fairly simple fix that can be done by any skilled DIYer. Depending on the severity of the issue the caulking used previously may need to be removed before a new layer of caulk can be applied. It is crucial to keep in mind that when it is about uPVC window repairs you should not be tempted to 'over-caulk in order to make the area harder to clean and could reduce your energy efficiency.

Check that any drainage holes have no debris inside them and that the sill pan is properly angled to drain away from the window. In more severe situations, you may have to replace the window.

Other signs of long-term water leakage are decayed sills and the appearance of black spots of mold on the wall near the window. This mold thrives in damp environments and can quickly spread across the house.

It is also important to note that if the leakage is coming from between the glass of your double glazed window repairs-double glazed window repairs near me windows it may be more likely to be a problem with the glass seal, rather than the frame or sagging. It is also possible to be fixed by a uPVC window specialist who will replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or loose and open with ease it could be the hinges that are at the fault. Anyone who is a skilled DIYer can fix hinges in just a few minutes.

Like any mechanical component hinges are prone to wear out over time. The process of replacing a hinge on a window is an easy procedure, but it is easier if you have someone to assist in holding the frame in place.

Check that the uPVC hinges are open and closed in the right direction. Look for the arrows on each hinge to determine which way the window should be opened.

The issue could be caused either by opening the window improperly or a faulty installation at the factory. It is usually possible to fix the issue by sending us a photo on our website. We will be happy to give you advice.

It is also crucial to grease the hinges regularly. Applying an engineering lubricant that is light to the hinges is a good method of doing this. We recommend using an oil that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication can help the window operate and close more easily. It can also lower the possibility of a window sticking and help prevent corrosion. This should be done at least every year. WD40 or other solvent-based oils should not be used as they can damage your uPVC windows.

5. Draughts

Draughts can be caused by different factors. Firstly the hinges, again due to wear and tear could become misaligned. This will cause a gap to form between the sash and the frame. This can be easily repaired by giving them good clean, but if they are beyond repair it may be necessary to have them aligned or replaced. The interlock, which is located on the hinge of the window, may also become misaligned, again it's possible to give them a thorough clean, however in some instances it could be necessary to get them replaced.

These seals can wear down or become damaged over time, allowing air escape. Replacement of these with high-quality weatherstripping is a good way to stop draughts. Replace the windows made of Upvc with low-emissivity lenses. This will help regulate indoor temperatures and decrease the possibility of draughts.

The last way to reduce draughts effectively is by using a Draught-excluder. These are usually made of fabric tubes filled with a filler which can be hung over your window sill. These will keep your home warm by blocking cold air.

The windows made of upvc can remain a great source of insulation and security in your home with a little regular maintenance and repairs. However, it is important to realize that all windows have a life span and they may reach the point when it's more economical to replace them than fix them. If you have any problems with your window made of upvc you should consult an expert as soon as possible.