• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Maintaining Timber Windows

A well-maintained wooden window is an important component of a historical building. It reflects in varying degree the materials and technologies of the time it was constructed, the architectural style and craftsmanship.

When repairs are feasible to existing windows should be carried out in situ. upvc door repair cost systems made of resin can be used to fix the most damaged areas of decay without removing the whole window.

Durability

The timber windows in many historical buildings were made to last for a long time. However, they do need to be maintained to ensure they look good and operating properly. Maintenance tasks include repairs to sash cables, retightening of pulleys on sash, and painting. The demand for upgrading timber double glazed windows cambridge windows in order to increase efficiency in energy use is also growing. This may mean replacing old glass units, repairing existing window repairs cambridge rebates or putting up new cills for better air sealing.

A key problem with traditional windows is damage caused by corrosion of the paintwork. This is particularly true when windows made of sash are involved because the gaps between the sashes can be quite wide. In these instances, water can penetrate the paint film and cause rotting of the putty and underlying wood. The rotting can be exacerbated due to weather conditions that are poor. To prevent this from happening, windows need to be regularly painted with an exterior wood paint.

In addition to repainting, corroded areas need to be repaired with a resin-based repair product. This will ensure that the highest possible amount of the original fabric is preserved. It is also necessary to reduce the number of holes you drill into the frame for cable entry as these can let in water and cause decay.

The wall's structural movement can cause distortions in the frame as well as sash. This can lead to the sash not fitting properly and jamming or sticking into the opening, or breaking glass. Most often, this is corrected by the fitting of new sash boxes constructed from slow-growing deal (pine) or oak. The cill needs to be constructed of a durable hardwood, like oak, to prevent differential movement between new and old work.

To reduce the risk to reduce the risk of this happening, there are a variety of companies that make Boston pattern sash made of wood that can be fitted into most openings. The sash is available in a variety of sizes and finishes to meet the requirements of the modern homeowner. The new sash, coupled with quadruple draft strips and a more efficient thermal insulation, could make a significant difference to the efficiency of your home's energy usage.

Aesthetics

A lot of old timber frames have a great aesthetic appeal, as they show, in some form, the quality of the wood technology, design, and style of the time they were built. They could also have a significant historical significance in their own right. This is particularly true for windows that were unglazed in the early days of timber-framed structures, where the majority were series openings in structural frames that were subdivided horizontally by mullions, and vertically by wood or iron bars in order to protect against intruders.

It is essential to preserve the appearance of traditional timber window joinery. As soon as you notice any decay caused by the penetration of moisture it is essential to stop it. It is recommended to do this through thorough painting, especially where there has been damage or deterioration. It is advisable to use paints that are specifically designed to be used part of a system (primer, undercoat and finish) and to follow the manufacturer's recommendations regarding preparation and the number of coats needed at each stage.

Wet rot is a frequent issue in old timber windows. The best method to stop it from becoming a problem is to take out sections that are damaged or rotten as soon as you can to stop the spread of the fungus responsible for it. Replace the wood that is rotting with slow-growing deal (pine) and, should it be possible, the same kind of timber that is being removed to prevent the possibility of differential movement.

In the late the 17th and early the medieval periods, glass became less expensive and more plentiful so that glazed openings in timber-framed buildings gradually became more elegant with wooden tracery moulded mullions, moulded mullions, and deep protruding cills. Increasingly, the double glazing repairs was placed within frames with rebates and then pinned with 'glazing sprigs' rather than into lead cames. This method of glazing not only makes the windows less likely to leak and also allows wider sheets of clearer glass to be employed than would be possible otherwise without the use of lead lights.

Energy efficiency

The traditional timber windows are energy efficient due to their thickness and multilayer construction, as well as their attention to particulars. The large glass areas, the deep projecting cills, and the large glazing areas minimize air infiltration. With secondary glazing and draughtproofing, windows can be upgraded to improve their energy efficiency. However it is essential to keep in mind that these measures should be evaluated in relation to the overall quality and appearance of the window in its original form.

It is sensible to repair or upgrade existing windows that are older rather than replacing them, particularly when improvement in thermal efficiency can be achieved through simple repairs. Older windows are usually of historical value, as they demonstrate a variety in technological advancement and changes in architectural taste. The pressure to replace these windows are typically based on the assumption that windows of the past will require replacement in the near future, but most are still capable of serving for 150, 200 or even 250 years if they are properly maintained.

It is important to recognise that the decay issues that are that are typical of timber windows can be prevented by regular maintenance and prompt repairs. Additionally it is crucial to spot damp penetration issues and fix them promptly to prevent serious damage. The early deterioration of paint is a particular problem, as it allows moisture to penetrate the wood and cause wet rot. It is not uncommon for this issue to go unnoticed until the paintwork begins to crack or become curly. However, it can cause structural damage and further decay.

A good quality paint will stop this moisture from entering. It is also essential to keep the paintwork in good condition to avoid condensation and mould growth. Modern synthetic paints pose a problem since they are usually water-resistant and can cause mildew to develop within the window frame.

The majority of older windows were made from timber that contained an extensive proportion of sapwood. These timbers are susceptible to deterioration rapidly if exposed to wet weather conditions, but they can be protected by a thorough preservative treatment before they are put to use. It is essential to select the right kind of wood for the location and climate, as these factors can affect the durability of the joinery. Local window doctor manufacturers produce a range of sash made of timber that can be adapted to fit specific openings in historic buildings. They can be produced in the standard Boston pattern or in custom sizes to suit historical structures.

Maintenance

The life span of windows made from timber can be extended considerably through regular inspections, careful redecoration and timely repair. The major cause of decay is the penetration of moisture through deteriorated paint and putty. This can be prevented by careful painting and using high-quality wood preservative.

It is essential that repairs to old sash or aluminium Casement windows Cambridge windows are well executed, and carried out with minimal disruption. Many of the traditional designs for timber windows can be repaired without removing the frame, and this approach should be taken whenever feasible. Peeling or loose paint should be removed carefully and lightly sanded to improve the key of the surface and allow for a better adhesion of the new coating. It is important to avoid stripping old paint layers that may have historic value If these are present it is recommended that a study of the paint be conducted.

When a piece of wood has begun to decay, the best course of action is to take out the rotten material and replace it with spliced-in timber inserts that are shaped to match the existing profiles. The inserted timber should also be treated with a wood preservative and the junction between masonry sub-cills and timber cill should be sealed.

Replacement of traditional windows using PVC-u can be an appealing option, particularly when the installer offers a "one-stop shop" installation that handles removal and replacement in a day. It is, however, vital that the installer of windows replacement has a thorough knowledge of the construction and history of traditional wooden frames. This will enable them to make the right recommendations for energy-efficiency improvements and other technological advancements that won't harm the character of an historic building. The window installers who provide replacement windows must be registered with a Competent Persons Scheme such as FENSA. This will ensure that the replacements are deemed acceptable under Building Regulations as a suitable option. It is quite possible for a skilled and experienced carpenter to install PVC-u windows that are sympathetic to the character of the building originally. This is especially relevant when windows are in listed buildings or conservation areas.