• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Locked Keys in Car? Here's How to Open Your Car Without Damage

If you've locked keys car your keys in your car, don't panic. You can try several ways before calling for roadside assistance or locksmith service.

For instance, you could make use of a shoelace that has an a slip knot to pull up the post lock, or a coat hanger made of wire that you untwist and mold into a hook. You can also use an inflatable wedge or door wedge.

Pump Wedge

If you've been stuck in a car locked up and none of the DIY methods like shoestrings, wire hangers or wedges work then it's time to call an expert. A locksmith or a repo service provider could have lockout tools that will allow you to open your vehicle without damaging it.

If they do, be sure you use them in a proper manner. The most important thing is to know where to place the wedge tool. Many people make the mistake of placing the wedge on the top corner of the door, which is where it is most prone to being damaged. This is a bad move since you risk damaging the weather stripping and wires within the doors. Instead, put the wedge in the biggest part of the gap you can see and where it will have maximum leverage.

The Pump Wedge is a high-quality inflatable wedge made of heavy duty non-marring vinyl material. It is placed between the door of your vehicle and the door frame, and is inflated to create a gap. This will let you slide in other tools like a long-reach car opening tool rod. It also has a hook on one end that you can use to grab the latch within the door handle.

This can be accomplished with two wooden door stops. You can use them to break the gap between the back of the door. You can also make use of a slim-Jim, a thin strip of metal that is bent into a hook, and then used to latch onto the lock. This method requires practice, however, since you must be careful not to tear the door's weather stripping.

A shoelace is a different alternative, but it's only with older cars that don't have a button to unlock the mechanism. You can tie a slip knot through the middle of the lace and then move it upwards and downwards through the door's seam until you locate the latch. Then move the lace upwards and down until it is able to catch onto the lock. The slip knot should be tightened and then pull it upwards. This is more difficult and could scratch the paint on the door or scratch the trim if not careful.

Inflatable Wedge

If you own an inflatable wedge-shaped car door opener, you'll be able to open your car without the necessity of prying or slim jim tools. These car door wedges can be inserted between the window and the frame of the vehicle and when they're inflated, they create a space enough to fit an extended-reach tool like an a-slim jim or button grabber. This method is safer than using tools for prying and can be used when you don't have a screwdriver.

Another option to unlock a car without damaging its interior or exterior is to utilize a coat hanger that has been shaped into a hook shape. It can be used to grab the lock and may be more effective than a flat screwdriver because it is less likely cause damage to the paint on the car. You should still check the other doors to ensure there's no other means to gain access to the door.

You can also try using a plastic bag that has been bent into a noose-like or v-shaped shape, but you will need to be cautious not to tear it because this could make your situation worse. This trick is especially useful in the event that you cannot locate the lock button. It may not be as reliable as using the wedge or a metal coat hanger however, it can be useful when you're in an uneasy situation.

The best tip we can give you on being locked out of your car is to stay in a calm state and put safety first. There are many solutions to this kind of problem, and if you take the time to review this article, you can be ready for any scenario that may come your way. By following the steps we've given, you will be in a position to unlock your car and go going without causing any damage or stress. If you are able, bring your keys along when you leave your vehicle.

Shoelace

It's one of those "oh crap!" moments that can cause a lot of trouble. It's best to have a few items that you can use to open your car without breaking any windows. Some of these items are easy to locate and could save you the expense of a locksmith or waiting for roadside assistance to arrive.

A twine or shoelace can be used to unlock a vehicle. It's simple to use and can be used on a variety of vehicles. The key to this method is a car open service equipped with post locks. They are stacked vertically on the window sill and are easily accessible from the outside of the car. To get the job done, use a shoelace to create a slip knot, then squeeze it into the gap between the frame of the window and the door. Once the slip knot has been placed, pull the ends of the string upwards to tighten it.

This technique is more effective for older vehicles, and might not work with newer models with a hooked interior lock. A screwdriver, if available, can help open the door in a more aggressive manner. You can also use a pole that you can pull from a nearby object, such as the door frame, or a piece wood, to put into the window frame. This will make room for an object to push the locking button.

Although the methods above might be safe for a lot of drivers, it is best to seek help if you can. This will prevent any additional damage to the vehicle and it can also lower the likelihood of an accident resulting from the stress of the situation. If you do not have a mobile phone or are unable to reach a helpline, it is important to notify trusted family members and acquaintances know where the vehicle is. A spare set of keys must be kept in a secure spot on your vehicle.

Wire Hanger

It's a gruelling situation to lock your keys in your car. But, the most important thing is to stay calm and think logically about what your options are for retrieving them. You will avoid making the situation more difficult if you do not be in a panic.

You can use a modified wire hanger to get into your car. You will need uncoil the coat hanger wire to create a straight edge with a hook that you can use to move the lock rod. Once you are able to reach the rod that locks your door you should be capable of pulling it up to allow you to open the door.

Another option you could try is using a rod or even the metal of the body of your vehicle. It is important to make sure that you don't harm the vehicle in this process. It is best to avoid having to disassemble the car. This method is more effective on older cars than on modern ones. However, it can be used on models that have unique door handles.

You can make use of a shoestring and a slip knot to accomplish similar tricks. This is a good idea for a postlock, however it will be more difficult to maneuver because you'll rely on the tension of the string to nab it. You can do this by threading a shoestring through the small hole in the weatherstripping of your vehicle's doors. Once the string has been threaded you can pull it in a tight manner to create a loop that will snap around the lock, allowing you to pull it out. This method can be extremely effective if you're lucky enough to find the lock in the proper spot.