• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC windows are an excellent option for modern homes. They are durable, long-lasting and easy to maintain. They do not get rotten or rusty like timber and aluminum.

Regularly cleaning and lubricating UPVC windows and doors is crucial. This will save you from costly repairs and increase energy efficiency.

1. Broken Glass

The broken glass in your windows can cause severe damage to your home and even be fatal. It is important to make sure that your windows are in good shape.

For single pane windows, it is fairly easy to replace them, and the replacement is usually able to fit into the frame of the previous one easily. If you have double-paned windows that are joined by internal beading, it is more difficult to remove and replace the panes that were previously in use. In this instance it is essential to purchase plastic spacers to aid in fitting the new pane into the window frame.

Wearing eye protection and thick gloves is a must if you plan to remove the glass yourself. It is also a good idea to lay down a drop cloth prior to when you start working on the glass, so that any fragments of glass fall onto the fabric instead of onto the floor, where they could be trodden under and cause further damage.

After the glass has been removed, it's a good idea to cover the gap with packaging tape or duct tape to block water and drafts from entering the property until a professional is able to come out and fix the window. It also acts as a barrier, preventing any intruders from gaining entry into your home. If the distance between the window and the door is large, you might want to use a security screen that also has an opening. This will provide the best of both.

2. Sagging

uPVC windows and doors are a low-cost energy efficient, durable and long-lasting alternative to timber sash windows. However, over time they are susceptible to a range of issues, including sliding. A sagging window in uPVC can cause problems with light, draughts and even security. It is crucial to act when you realize that your uPVC windows are falling down.

Repositioning the hinges can aid in fixing a window that is sliding. To do this, you'll need open the window so that you can access the frame. Then, you can remove the hinges on the top and bottom with a screwdriver and adjust the hinges clockwise or counter-clockwise. Close your window to test the fit after you have relocated your hinges. If you're satisfied with the size of the window, tighten the screws to hold them in place.

If you are unable to reposition the hinges, you may have to replace the seal. Rubber seals may dry out and lose their elasticity with time, leading them to loosen. It is crucial to replace your seal as soon as you can to ensure that your uPVC window waterproof and draughtproof.

uPVC handles may also become loose. Often, this is caused by screws that have come loose over time. However, it can also happen because the handle mechanism has worn out. It's relatively simple to repair a loose uPVC handle. The first step is to close your window and do a test to ensure that it fits. The corner joints of the sash should align with the casing joint. If it isn't then you can use the screwdriver to loosen the handle. Then, you can turn the mechanism into position.

3. Water Leaks

It is important to take action if get up each morning to find mouldy walls and floors that are wet. The leaks of water from windows do not only lead to the degradation of your home's structure but also undermine your efforts to regulate the temperature in your home. Most of the time, uPVC window leaks are caused by a damaged or missing sealant.

This is a simple fix that can be completed by any DIYer who is competent. Depending on how serious the problem is, the old caulking may have to be removed. It is essential to remember that when it is about uPVC window repairs, you should not be tempted to apply too much caulk and then make the area harder to clean and could reduce your energy efficiency.

Make sure that the drainage holes do not have debris inside them and ensure that the sill pan has been angled correctly to drain away from the window. In more serious situations, you might need to consider replacing the window.

Mold spots and rotten sills are another sign of water leakage. This is a fungus that thrives in damp conditions and can quickly spread across the house.

If the leakage is occurring between the double glazed window repairs near me-glazed glass it is more likely that the issue is with the seal than the frame. A uPVC specialist can easily fix this problem by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

Hinges may be to blame if your upvc window repair near me window is difficult to open or if it opens with the breeze. These are easily repaired by any DIYer who is skilled and can be done within a few minutes.

Almost every household in the UK will have either top hung or side hung uPVC windows that use hinges and like any mechanical part they will wear out over time. The process of replacing a hinge on a window is an easy process, but it's simpler when you have a person to help you hold the frame in place.

Make sure that the upvc window repair near me hinges are closed and open in the correct direction. You can do this by looking for the arrows on each hinge, this indicates which way the window should open.

The issue can be caused due to opening the window in the wrong way or due to a poor installation in the factory. Sending us a photo via our website will often solve the issue. We are more than happy to give advice.

It is also crucial to ensure that the hinges are lubricated on a regular basis. This can be done by applying an oil that is light in nature to the hinges. We recommend using a solvent-free lubricant, such as the 3-in-one Multi-Purpose oil. Regular lubrication can help the window to operate and close more smoothly. It can also stop corrosion and reduce the risk of sticking. The ideal time to do this at least once a year. WD40 and other solvent-based lubricants are not recommended as they can damage the parts of your uPVC window.

5. Draughts

Draughts in upvc windows can be caused by a variety of various factors. The hinges, also because of wear and tear, can become misaligned, this can cause gaps to develop where the sash meets the frame. These can be easily repaired by giving them a thorough clean, however if they are beyond repair it could be necessary to get them aligned or replaced. The interlock may also become misaligned. This happens on the hinge's side, and could require to be cleaned. In some cases, it may be necessary to replace these.

The next most common reason for draughts is window seals, these can become worn down or damaged over time, and will allow air to escape through these gaps. This can be avoided by replacing them with high-quality weatherstripping. Another alternative is to replace the window with low-emissivity glass, this will help in regulating indoor temperatures and will reduce the risk of draughts.

Another method of reducing the amount of draughts is to use a Draught-exclusion device. These are usually made of fabric tubes filled with a filler, which can be put on top of your window sill. They can keep your home warm by blocking out cold air.

With a little maintenance and repair windows made of upvc will provide excellent security and insulation for your home. It is crucial to recognise that all windows have a lifespan and there may come a point where it is more cost-effective to replace them rather than repair them. So, if you are experiencing problems with your upvc windows, it is best to seek professional assistance as soon as you can.