• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC windows are an excellent option for modern homes. They are easy to maintain and durable, as well as long-lasting. They do not decay or rust as aluminum and timber.

Cleaning and lubricating regularly UPVC windows and doors is essential. This will reduce repair costs as well as improve energy efficiency.

1. Broken Glass

If the glass in your window is broken it can cause a great deal of damage to your home, making it extremely dangerous and possibly fatal. It is important to take the time to make sure that you're doing everything you can to keep your windows in good shape.

For single pane windows it is relatively easy to replace windows, and the new one is usually able to fit into the frame that was previously installed easily. If you have double-paned windows that are held together by internal beading, it is difficult to remove and replace the panes that were previously in use. In this instance, you will need to find some plastic spacers to aid the new pane in being able to fit properly into the frame of the window.

Wearing eye protection and thick gloves is a must if you plan to remove the glass by yourself. It is also recommended to lay down a dropcloth before you begin working on the glass so that any shards will fall onto the fabric rather than on the floor, where they could be trampled on and cause further damage.

Once the glass has been removed, it's a good idea to cover the gap with clear packaging tape or duct tape to prevent water and drafts from entering the home until a professional is able to come out and repair the window. This will also act as a barrier that will prevent any intruders from getting access to your home. If the gap is large, you may think about the security door with an integrated window, as it will provide the best of both worlds.

2. Sagging

Upvc is a long-lasting, energy-efficient and affordable alternative to timber sash windows. As time passes, they may develop a number of problems such as sliding. A sagging uPVC window could cause issues with light, draughts and even security. It's important to take action immediately if you discover that your uPVC windows are falling down.

To fix a sagging window you can try repositioning the hinges. To accomplish this, you'll need to open the window to get to the frame. You can then unscrew both the top and bottom hinges using a screwdriver, and then adjust them clockwise or counter-clockwise. After you've repositioned the hinges, close your window and test it for fit. If you're satisfied with the fit, you can tighten the screws until they remain in the right place.

If you aren't able to move the hinges, you may need to replace the seal. Over time rubber seals can lose their elasticity and dry out which causes them to lose tightness. It is crucial to replace your seal as quickly as you can in order to ensure that your uPVC window repairs waterproof and draughtproof.

uPVC handles could also become loose. Often it is due to screws that have come loose over time. However, it can occur because the handle mechanism has worn out. It's fairly simple to repair a loose uPVC handle. First, you'll need to close the window and perform an initial fitting. The joint at the corner of the sash should be aligned with the joint on the casing. If it doesn't then you can make use of a screwdriver to loosen the handle and return the mechanism to its original its original position.

3. Water Leaks

It is essential to take action if get up each morning to find mouldy walls and wet floors. The leaks of water through windows could cause structural damage to your home, and impact your ability to regulate the temperature in your home. Most of the time, uPVC window leaks are caused by damaged or missing sealant.

This is a fairly simple fix that can be done by any skilled DIYer. Depending on the severity of the issue is, old caulking may have to be removed. It is crucial to remember that when it is about uPVC window repairs, do avoid the temptation to "over-caulk' as this will only make the area harder to clean and can reduce the efficiency of your energy.

Check that any drainage holes do not have debris inside them and ensure that the sill pan is properly angled to allow the water to drain from the window. In more severe cases, you may need to replace the window.

Other indicators of water leakage are sills that are rotten and the appearance of black spots of mold on the wall near the window. This is a fungus that thrives in damp conditions and can quickly spread across the home.

If the leakage is occurring between the double-glazed glass, it is more likely the issue is more with the seal than the frame. A uPVC specialist can fix this problem by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or are loose and open with ease, it may be the hinges that are at fault. Anyone with the skills to fix them can replace these in a matter of minutes.

Like all mechanical parts hinges are prone to be damaged over time. It is very easy to change the hinges on a window but it's much simpler if you have someone to help you to hold the frame.

Check that the uPVC hinges are closed and open in the proper direction. Check for the arrows on each hinge to determine the direction in which the window should be opened.

The issue can be caused either due to opening the window in the wrong way or due to a poor installation in the factory. Sending us a photo via our website is often enough to resolve the problem. We are more than happy to provide assistance.

Regularly lubricating the hinges is essential. This can be done by applying a light engineering oil to the hinges, we recommend using a solvent-free lubricant, such as 3-in-one Multi-Purpose Oil. Regular lubrication can allow the window to operate and close more smoothly. It can also reduce the possibility of a window getting stuck and stop corrosion. The ideal time to do this at least once a year. WD40 or other solvent-based oils are not recommended as they can damage your uPVC windows.

5. Draughts

Draughts in Upvc windows can be caused by a variety of various factors. First, the hinges because of wear and tear, may become displaced, which causes gaps to develop where the sash joins the frame. If they're beyond repair, it could be necessary to have them realigned. The second is the interlock, which is on the hinge side of the window and can also become misaligned, again it is feasible to give them a clean but in certain cases, it may be necessary to have these replaced.

These seals are susceptible to wear and tear or get damaged over time, allowing air to escape. Replacing these with high-quality weatherstripping can help keep draughts at bay. Another alternative is to replace the upvc window with low-emissivity glass, this will help to regulate indoor temperatures and will reduce the risk of draughts.

One of the most effective ways to reduce drafts is to use a draught excluder. These are typically fabric tubes that are filled with some type of filler. They can be placed on top of your windowsill. They can help block out cold air and keep your home warm and cosy!

With a little regular maintenance and repairs, your upvc windows will provide an excellent level of security and insulation for your home. It is essential to remember that all windows will eventually wear out and it is more cost-effective to replace them rather than repair them. If you have any problems with your Upvc window, it's best to consult an expert immediately.